Download Click

I want to share How to root and unlock Huawei Kestrel EE G535-L1.Before you can unlock the Huawei Kestrel EE G535-L1 using SigmaKey Box Software to its SIM provider you must root first the phone using iRoot.

How to Root Huawei Kestrel EE G535-L1 using iRoot

• Download and Install iRoot in your PC
• Open iRoot Software
• Connect Your phone to the USB Cable and wait until detected by iRoot
• After fully detected by iRoot,Click the root button
• Wait now until root process success and your phone will automatically reboot

Successfully Rooted

SuperUser

How To Direct Unlock Huawei Kestrel EE G535-L1

Huawei Ascend G510 detailed specificationsGENERAL

Release date April 2013
Form factor Bar
Dimensions (mm) 134.00 x 67.00 x 9.90
Weight (g) 150.00
Battery capacity (mAh) 1750
Removable battery Yes
SAR value NA

DISPLAY

Screen size (inches) 4.50
Touchscreen Yes
Resolution 480x854 pixels

HARDWARE

Processor 1.2GHz dual-core
RAM 512MB
Internal storage 4GB
Expandable storage Yes
Expandable storage type microSD
Expandable storage up to (GB) 32

CAMERA

Rear camera 5-megapixel
Flash Yes
Front camera 0.3-megapixel

Hello Guys!I want to share How to Flash new firmware on your Huawei Y600-U351.Do this if your Huawei Android Phone have problem like this hang in logo,phone freezes,rebooting and no power but only work if your phone detected by PC.

But first thing first,Before doing this make sure you charge your battery atleast 60% up and also make a hard reset first,because sometimes performing a hard reset will fix this kind of problem  mention above...

This is How to Do a Hard Reset in your Huawei Y600-U351

1.Power Off Phone
2.Hold and Press Volume UP to go to Android System Recovery
3.Use Volume Down to select wipe data/factory reset
4.Use Volume up to confirm the selection
5.Now select yes-delete all user data,again confirm by pressing Volume up
6.After Complete wiped,Reboot System to finally wipe your Phone

Now,if this solution wont work on your phone,Flashing new firmware will probably work.First,you must download below file to do this..

The File can be Download Here>http://consumer.huawei.com/ar/support/downloads/detail/index.htm?id=42945
All you need is in this file,so download it!

After Downloading this,Extract it using extractor software in your desktop screen to easily navigation.

How To Flash New Firmware in your Huawei Y600-U351.

1.Open folder Y600-U351V100R001C332B006>Software>upgrade tools& drivers>SP_Flash_Tool_v5.1352.01

2.Open Flash Tool

3.Click Scatter loading and browse for MT6572_Android_scatter(USB upgrade>Y600-U351V100R001C332B006_DCC)

4.Click Download (See image)

5.Now connect your phone (Must be Off) and wait if flashing is completed

6.Power your Phone (If powered and your are in activation window,conrats your phone has been flash to the new firmware.)


Note:You must installed the drivers of your phone to detect in your Pc.You find this in the file that you downloaded above...


Any questions???Use the Comment System!

METHOD 1
Step one:
Prepare an SD card,

Heres How you can unlock your Huawei Y600-U20 to any sim provider using Sigma Box Software.

Note:Download the drivers of your from here.

Select "MTK" platform from the tab menu in the upper left side of the software

Go to "Unlock" tab

Turn-Off  the phone

Connect turned off phone to PC with USB cable

Install the drivers

Select Mobistel Cynus T1-CDC Serial in the ports selection tab

Press "Direct Unlock" button

Message "Unlocking phone... Done" indicates that procedure was completed successfully

Disconnect the handset. Remove and reinstall the battery

Below is the direct download link of the firmware of Huawei Ascend Y220-U10.

The extracted folder contains firmware,drivers and flash tools.

Note:Your Phone should have at-least 50-70 percent of battery to complete the flashing process.

Download:

Huawei Ascend Y220-U10


How To Flash Firmware using SP Flash Tools

1.Download and extract the stock firmware on your PC.(Recommended in desktop to easily navigation)

2.After extracting you will find the SP Flash Tool,Firmware and Drivers.

3.Install the USB Drivers(skip if the drivers already installed)

4.Open the SP Flash Tools and load the scatter files from the firmware folder.

5.Now,click on download button to begin the flashing process

6.Now,Connect your phone to the computer using USB Mini Cable,after connecting it Press Volume Down or Volume Up key,so that your computer will easily detect your phone.

7.Once the Flashing is complete,a green ring will appear.


8.Close the SP Flash tool on your computer and disconnect your phone from the computer.

9.Your phone now should be Powered and you can now use it normally!!!

Thats It!!!!

Below is the direct download link of the firmware of Huawei Y320-U10.

The extracted folder contains firmware,drivers and flash tools.

Note:Your Phone should have at-least 50-70 percent of battery to complete the flashing process.

Download:

Huawei Y320-U10 
SP Flash Tools


How To Flash Firmware using SP Flash Tools

1.Download and extract the stock firmware on your PC.(Recommended in desktop to easily navigation)

2.After extracting you will find the SP Flash Tool,Firmware and Drivers.

3.Install the USB Drivers(skip if the drivers already installed)

4.Open the SP Flash Tools and load the scatter files from the firmware folder.

5.Now,click on download button to begin the flashing process


6.Now,Connect your phone to the computer using USB Mini Cable,after connecting it Press Volume Down or Volume Up key,so that your computer will easily detect your phone.

7.Once the Flashing is complete,a Check will appear.



8.Close the SP Flash tool on your computer and disconnect your phone from the computer.

9.Your phone now should be Powered and you can now use it normally!!!

Thats It!!!!

How To Flash  HUAWEI Y300 Using SD Firmware Update With Firmware

Problem:

HUAWEI Y300 Hang On Logo Done!

Procedure:

Download Firmware HERE

Put "dload" folder from archive on formatted micro-sd cards ROOT
Put micro-sd card into phone
Start phone in download mode = Press the VOLUME UP and VOLUME DOWN key, and then press the
POWER key to power on the phone and enter the Software Upgrade Mode
(taken from upgrade manual - which is found in archive, pdf ... )
Wait for finish ...

P.s. if not accepting firmware - means its not international version ....





FINISHED PRODUCT:






Credits to the owner of this images kean lopez i have no time to take pictures on my own,I also base on his post in gsmsandwich on How To Flash  HUAWEI Y300 Using SD Firmware Update With Firmware!

Heres How you can unlock your Huawei Ascend Y360-U31 using NCK Dongle.

Very easy if you have NCK Dongle or NCK Box Software.

Heres How:

Open NCKDongle AnroidMTK 2.5.6.2

Select Huawie and correct unit

Now,click unlocking tab

Must select META Mode

Then,Click Direct Unlock

Connect your phone to PC using USB Mini Cable.(must be off)

Wait until Finish