Download Click

Overcome Smartfren Andromax G2 Bootloop on Logo or Error

Overcome Smartfren Andromax G2 Bootloop on Logo or Error

Bootloop is a condition where android smartphone is stuck on Android logo, or it cannot turn on, almost this problem just restart repeatedly and it means your Android smartphone is useless. If you experience this problem you may think you need to buy the new one, or at least you have to take it to Service Center, but in this article we are going to guide you to overcome Smartfren Andromax G2 Bootloop on logo or error with our tricks.

This tutorial does not use TF Update of Andromax G2 (Haier AD681H), but we will use another Haier smartphone and it is has similar partition. We are definitely lucky because we can find this similar partition, so we can overcome our Andromax G2 by ourselves if our Andromax G2 is error.

Warning

• This tutorial is for Andromax G2 (HAIER AD681H) only, it means this tutorial is not for Andromax G2 Qwerty (AD9A1H)
• Ensure your SD Card has at least 3 GB of available space
• This TF Update still uses Jellybean OS 4.3 (do not expect for higher version)
• The minimum of battery is more than 50%
• If there is file !ad681H!.l and #ad681H#  inside your SD Card memory, you have to delete it first before you go to execute your Andromax G2
• This tutorial will force our Andromax G2 to install Custom Recovery TWRP, and this TWRP will be used to install Andromax g2 ROM

Steps to overcome bootloop on Smarfren Andromax G2

• Download Sdimage that contains TWRP and Stock ROM file of Andromax G2
• Extract sdimage_TWRP_Andromax_G2.rar  later you will see sdimage folder that contains recovery.img and hycookie.txt file
• Put sdimage folder and Stock-ROM-JB-Deodex-Andromax-G2.zip file to SDCard/MemoryCard
• Insert your SD card to your Andromax G2 although it is still bootloop
• Turn on your Andromax G2 and there will a process with an icon such battery logo, after update success or finish unplug the battery immediately and unplug your SD Card from Andromax G2
• Delete sdimage folder and put it to your Andromax G2
• Turn on your Andromax G2 by pressing volume up and power simultaneously until Smartfren logo appears than you may release your fingers from those buttons (volume up and power)
• If the process is correct, your Andromax G2 will go to TWRP (Team Win Recovery project)
• Select Wipe and then swipe the Swipe To Factory reset cursor (remember that all application and game installed inside your Andromax G2 will be deleted)
• And then select Install and find and click Stock-ROM-JB-Deodex-Andromax-G2.zip file
• Select Reboot System
• Booting process may takes rather old if this is the first time you doing this, you can wait about 15 minutes
• Done, you already overcome bootloop on your Andromax G2

sdimage TWRP Andromax G2 - Download

Stock ROM Jellybean Deodex for Andromax G2 - Download

Available link for download

Repair and Overcome Oppo Mirror 5 Bootloop and Stuck on Logo Without PC

Repair and Overcome Oppo Mirror 5 Bootloop and Stuck on Logo Without PC

Accidentally or intentionally we may experience an error and it is a matter of course on our smartphone, it would be nice if we can solve this problem without having to go to service center (unless the damage is severe enough). If you experience problems such as bootloop (stuck in oppo logo) on Oppo Mirror 5  you can try the tutorial below.

Bootloop is a condition which smartphone stuck on logo and cannot go to homescreen, this happens due to many things could be because there is an application system crashes, error in modifying the file system or other things. In the following tutorial we will re-install the firmware to be able to work again properly.

Before attempting this tutorial you should note the following bellow:

• This tutorial is only for Oppo Mirror 5 a51w
• We are not responsible if with this tutorial Mirror 5 you even get more errors, if you do not dare to try the following tutorial you should take it to a service center
• This tutorial will remove apps and games which are installed on your smartphone and SMS along with its contacts.
• If the damage is severe enough course, this tutorial will not be able to run well

Steps to Flash Oppo Mirror 5 Bootloop

• Download the Firmware file Oppo Mirror 5 (a51w)
• Put the file on the sdcard, it can be via a card reader for those who have a PC or if do not have a PC you can borrow a friends phone and download file  above  and move it to your SD Cardcard
• Remember put the file outside the folder !!
• Now turn off your Mirror 5 and then press and hold the Volume Down (sound reducers) then press also hold the POWER button simultaneously for a few seconds until the Oppo logo appears and then release.
• If successful will enter Oppo Recovery Menu and Select English Language
• And then select Wipe Data Cache
• Perform Wipe Data and Wipe Cache and select YES
• Next select Install From SD and Select Mirror5EX_11_OTA_011_all_201512101105.zip file you have downloaded
• Now, Flashing process is running and wait until the process is completed
• Next select Reboot and then Yes
• Please wait for the boot process may takes about 5 minutes

File:

Firmware Oppo Mirror 5 -  Download

Available link for download

Overcome Hang on Logo for SAMSUNG Galaxy J1 Hard Reset

Overcome Hang on Logo for SAMSUNG Galaxy J1 (Hard Reset)

How to do hard reset or fix hang on logo for SAMSUNG Galaxy J1 - We cant deny that one day our smartphone face hang or just feeling so slow and just wait and this problem makes us so annoying. This problem should happen on your Galaxy J1 also, therefore in this article we are going to guide you how to fix it via hard reset. We just use hard reset method to fix it because we had created similar article via flashing (you can check in our old article if you think flashing for Galaxy J1 is the best solution).

We dont really know the reason why smartphone becomes so slow and just wait in our future life, but there are some reasons they are because there are many games, applications or much more. In this article we hope that by following and reading our tips youll fix hang on logo for your Galaxy J1, lets follow the instruction bellow:

Warning

By doing hard reset your data and file will be lost, it means before you do it you have to back up your data and file first to PC or you can upload it on Google Drive.

How to do hard reset on SAMSUNG Galaxy J1

• Turn off your phone completely, you can turn off !

• Press Volume Up button (Home) and power simultaneously

• This is what the people call "Recovery Menu", menu screen will appear

• Just navigate it by moving with volume button and highlight "Wipe data / factory reset" and press Power to select OK

• Your phone is doing hard reset automatically, in this step your data and file will be lost

• After it is completed you can reboot your phone, it is press power 

• Done

Available link for download

3 Simple Methods To Overcome Bootloop On Android Devices

3 Simple Methods To Overcome Bootloop On Android Devices

• Turn off your Android device and unplug its battery for a while.

• Press combination button to go to CWM, specify this with kind of your Android device (each Android devices have different method).

• If you are there, choose Wipe data / factory reset,  if it ask you to confirm the process, click Yes.

• Navigate it via volume button and choose Advanced, and then choose Wipe Dalvik Cache, If theres notification to confirm just click Yes

• After that find and press Mounts and storage, after that choose Format Data and Format cache. This method causes you lose your data and file. 

• Done

Available link for download

Overcome Oppo Neo 3 R831K Bootloop via Flashing

Overcome Oppo Neo 3 R831K Bootloop via Flashing

This is the article about how to resolve Oppo Neo 3 R831K bootloop via flash. Oppo Neo 3 R831K bootloop happens when it turns only shows Oppo logo and cannot enter to Home menu, in this case you have to do Hard Reset on Recovery menu but that also encounters the problems. To overcome this problem you must flash your Oppo Neo 3 R831K to make it normal.

Doing flash Oppo Neo 3 is not certainly just overcome bootloop, but it can overcome system application error, stop application system or when application does not respond, hang, stuck on logo or the other problems. After re-flash, Oppo Neo 3 will return normal as the first time you buy it from the store.

Before re-flash Oppo Neo 3, you must download first some materials or files we have provided below. Remember that you have to specify firmware version for your Oppo Neo 3 because each versions have different use.

Steps to Flash Oppo Neo 3

• Extract USB VCOM driver and install it on your PC/Laptop
• Extract also SPFlashTool file and firmware Oppo Neo 3R831K you have downloaded
• Open SPFlashTool folder and run flash_tool.exe by clicking right mouse and select Run as administrator
• After Flashtool opened, click scatter-loading and then find MT6572-Android-scatter inside the firmware Oppo Neo 3 folder you have extracted. Click Open and wait for a moment until the firmware loaded perfectly to tools sp flashtool

• And then click Download button inside sp flashtool v5

• Turn off your Oppo Neo 3 (to ensure it is off, wait for a moment)
• Now connect your Oppo Neo 3 to PC using USB cable while pressing Volume Up button and flashing process will automatically run, wait this until it is completed (if flashing process is not running, please connect Oppo Neo 3 without using battery).
• If finally flashing process has been completed, Oppo Neo 3 is going out with checklists green circle like in the image below:

• Next, unplug Oppo Neo 3 from PC and turn on your Oppo Neo 3 (after flashing, first boot may takes at least 15 minutes)
• Now flashing Oppo Neo 3 is finished

Files:

USB VCOM Driver - Download

SPFlashTool v5.1352.01 - Download

Firmware Oppo Neo R831K - Download

Available link for download

Overcome and Repair Bootloop on Smartfren Andromax C2

Overcome and Repair Bootloop on Smartfren Andromax C2

Maybe for those who are familiar to modify Andromax C2 or already installed a custom recovery such as CWM or TWRP Philz says that bootloop or other errors are easy to overcome, but for those who still little knowledge of android smartphone will be confusion to overcome these problem2. This time I want to share a tutorial how to overcome Andromax C2 bootloop or switched off. In this article we are going to overcome Andromax C2 bootloop or Andromx C2 brick.

This tutorial to flash the firmware Andromax C2 using TF Update AD688G file, which contains the firmware file Andromax C2 which can be used to improve your C2 which bootloop or die, but not to condition the total dead or due to hardware damage. But theres no harm effect to try this if you pay attention and follow the instruction carefully. Flash Andromax C2 AD688G is not that difficult if we know the method and this can also work for flash Andromax C2 via PC.

Warning

• For those who have Andromax C2 with Jellybean version, in this tutorial it can be used if to update to Kitkat.

• For Andromax C2  users with there is front camera version can also follow this tutorial but you have to change the folder to be newad688g.v1and change also ad688g.xml file to be newad688g.xml.

• Make sure the battery condition is at least 70%

• Inside this file we have changed stock recovery  with TWRP.

Steps to Overcome Andromax C2 Bootloop, Softbrick, Brick, Stuck on Logo

• Download TF Update kitkat

• Then extract the file there will be a folder named ad688g.v1 (for the extract it is recommended to use a PC so the file  is not corrupt)

• After that put ad688g.v1 in sdcard folder (do not put it inside the folder!)

• After all is clear you can turn off Andromax C2

• Then press the Volume Up and Volume Down then hold the Power button at the same moment and then release them

• If you do the correct step you will see loading process with chinese words

• During the process do not press any button, but just wait

• wait until it completes later it says "Update Success!", then press and hold the Power button momentarily

• The boot process a little longer than usual about 5-10 minutes

•  if your Andromax C2 is successful you will go to the homescreen and it will look like the first time you buy

• Done

 File:

TF Update KitKat - Download

Available link for download

Fix Resolve And Overcome Bootloop On Lenovo A6000

Fix, Resolve And Overcome Bootloop On Lenovo A6000 And Lenovo A6000+

AnyIndo - Since yesterday there are some Lenovo A6000 users were asking how to resolve bootloop on their device, and incidentally now we are trying to use this A6000 Lenovo. To overcome bootloop or just stuck in the logo on Lenovo A6000 can easily be fixed and in this article we would like to guide you without a PC or Laptop. But this is not certainly work 100% on your device because it depends some many factors that determine and because there is  malfunction hardware or deleted partition. 

Actually there are some reasons that cause bootloop, hard bricked and stuck on logo. The most reason boootloop on Lenovo A6000 is due to the failure to update OTA because your mobile phone is still  rooted because when you want to update your firmware via OTA, your device is not allowed to root. Bootloop can be  also because errors and can also because you make a mistake file in the system or deleted of file on your Lenovo A6000.

Warning:

• We can not guarantee this can fix 100% the problems on your device, but try to help you with all the efford

• All the consequences in this tutorial is not our responsibility, and you take it if you are ready to follow this

• We recommend you to bring your bootloop device to the Service Center in your city

• In this tutorial we tried Lenovo A6000 with KitKat OS, surely if youve updated your device to Lollipop you need to downgrade it first to KitKat

• All game, application, photo and application on your device will be lost if you follow this tutorial, means you have to back up it

How to Fix Bootloop on Lenovo 6000:

• Download the firmware above

• For Lenovo A6000+ you can use Lenovo A6000+ firmware above. Specify it with your android type

• Put the file you have downloaded on SD Card (do not put it inside any folder)

• Go to Recovery Menu by pressing Volume Up, Volume Down and Power simultaneously and hold it until Lenovo logo appears, if it is appeared you may release your hands

• Use volume button to navigate up and down, and power button to select (OK)

• Choose Wipe data/factory reset and then Yes - Delete all user data

• Next, choose Wipe Cache Partition

• After that choose apply update from SDCard

• Choose firmware KitKat file youve downloaded

• Wait until flashing process is completed, and it will reboot automatically

Note:

This tutorial takes about 10 minutes to go the homescreen, just be patient and wait.

Thats all about this article and we hope this is useful for anyone who want to resolve bootloop on Lenovo A6000 and Lenovo A6000+

Files:

Firmware A6000 KitKat - Download

Firmware A6000+ KitKat - Download

Available link for download